- Make sure this fitsby entering your model number.
- How It Works – Your smart dog will adapt to this smart barking collar. Each time your dog barks, the bark collar will activate a ultrasound or a harmless shock or both(It depends on your set). If your dog keeps barking, the ultrasound or shock will become stronger until the barking stops. Your dogs are quick learners – They will learn to stop barking before shock quickly.
- Three Anti-barking modes – Ultrasound mode (Green Light) warns your dog to be quiet. Harmless-shock mode (Red Light) prevents your dog from barking. You can freely set only ultrasound or shock mode, or BOTH as needed.
- Harmless Stop Barking – 7 sensitivity levels adjustment. Available for any size(small, medium, large) dog, and any kind of dog, even dogs that are very difficult to tame.
- Intelligent Barking Collar – Only your dog's bark colud activate the shock. Prevent the barking of other dogs from activating the collar and causing harm to your dog.
- Rechargeable and Waterproof – Built-in USB rechargeable battery. It takes around 2 hours to fully charge and can be used up to 30 days. Tt is waterproof that allows to use in any weather conditions.
Digital display — The digital tube shows the gears of vibration ,shock and sensitivity.
Adjustable mode — 1-7 level adjustable sensitivity, 0-7 gears of the vibration/shock, you can choose according to the instructions or the actual needs of your pet.
Automatic protection — an automatic protection mode to deactivate the collar if activated 7 times in 1 minute then back to work in one minutes.
Adjustable Reflective Strip — That allows you to keep an eye on your pet even in low visibility and also can protects your pet life from cars etc.
How to Test:
1.Turn on the power.
2.Set the sensitivity to 5-7grade and the shock greater than 0 grade.
3.Wear the tester on the conductive silicone prongs behind collar.
4.Please send a short voice like “wow” (as short as possible) to sensors.
**Since the frequency of human voice is different from that of pet,please test more time.
Item Size: 2.6 X 1.5 X 1 inches
Item weight: 70g Package
Gross weight: 120g
Collar Perimeter Size: 7.4-23.5 inches
1 x No bark receiver
1 x Adjustable Nylon Collar
1 x Test Light
1 x USB Link
1 x Instruction
1. Charge it before first use (adapter less than 1A).
2. If you need to adjust the strap and cut the redundant part of it, heat the end of the strap with a lighter, in case it get a raw edge.
3. Don’t wear it more than 10 hours a day, or it may affect the dog’s skin.
4. Don’t let the dog alone at first several times.
5. Check the tightness of the strap and your pet skin regularly.The prongs must be against your pet skin to work,you can fit one finger snuggle between the neck and collar.
6. Please take off your iron collar,before you put the bark collar.